After Each Use - Remington Smooth & Silky WPG2000 Manual

ENGLISH
REPLACING THE FOILS & CUTTERS
To ensure the continued highest quality performance from your shaver, we recommend that foils and
cutters are replaced regularly.
Signs that your foils and cutters need replacing:
Irritation: As foils get worn, you may experience skin irritation.
Pulling: As the cutters wear, your shave may not feel as close and you may feel your cutter
pulling your hair.
Wear through: You may notice that the cutters have worn through the foils.
CARE FOR YOUR TRIMMER
Care for your product to ensure a long lasting performance. We recommend you clean your trimmer after
each use. The easiest and the most hygienic way to clean the shaver is by rinsing the product head after
use under warm water. Always keep trimmer in the off position when not in use.

AFTER EACH USE

To clean the attachment precision and arc detail trimmers.
Brush the accumulated hair from the cutting assembly.
To clean the miniscreen foil
Hold the trimmer in one hand, with the other press the foil release buttons and gently pull the foil
assembly off the trimmer.
Blow any loose debris from the foil.
Brush the accumulated hair from the cutter assembly.
To replace the foil assembly, hold either side of the foil and push down until you hear a click and it is
firmly attached. Do not press down on the foil.
CAUTION:
Only use the light-grade oil supplied or sewing machine oil on the blades.
Do not use harsh or corrosive cleaners on the units or their cutters.
Do not apply pressure or hard objects to cutters.
Do not disassemble cutter assembly.
Do not submerge completely in water as damage will occur.
Always store this appliance and cord in a moisture-free area.
4