Kodak Z5120 User Manual page 23

Choosing the Selective Share setting—recommended
1
In a picture-taking mode, press the Menu button.
The Settings menu appears.
2
Press to highlight EYE-FI, then press the OK button.
3
Choose Selective Share (recommended).
When you're in range of your known Wi-Fi network, turn on the camera
to transfer pictures to your computer or mobile device.
Other EYE-FI Information
■
It's critical that you disable (do not turn on) Endless
Memory Mode in EYE-FI Center Software.
■
As of December 2010, EYE-FI Cards are certified for use in the
countries and regions in which they were purchased.
■
The EYE-FI Card has a wireless LAN function. Do not insert the
EYE-FI Card where Wi-Fi is prohibited, such as while aboard an
airplane or in a hospital.
■
Even when you set EYE-FI to Off, the card may transmit radio waves.
■
The card may become warm during use. This is normal.
■
Battery life is reduced when using an EYE-FI Card.
■
For the best reception when transferring pictures to a computer or
mobile device, the rear (LCD side) of the camera should face the
Wi-Fi access point.
Get support for EYE-FI Cards and Software
www.kodak.com/go/Z5120support
Using an EYE-FI Card (optional accessory)
Meijer.com
support.eye.fi
23