Setting Up The Share Button App (One-Time Setup) - Kodak Z5120 User Manual

Installing the Share Button App
If you successfully installed the software
See "Setting up the Share Button App (one-time setup)" on page 10.
If installation does not begin after several minutes:
1
Make sure the computer is connected to the Internet.
2
Open My Computer. (For MAC OS, go to the Finder.)
3
Open the KODAK Setup App. (For MAC OS, open the KODAK
Camera Setup App.)
If the installation still doesn't begin
1
Download the Share Button App from
www.kodak.com/go/camerasw.
2
After the Share Button App is downloaded, double-click to install it.
Setting up the Share Button App (one-time
setup)
After you install the Share Button App on your computer and click
Finish, the App automatically starts.* It prompts you through a one-time
setup of your email and social networking preferences. The addresses
and sites that you choose will appear on your camera when you press
the Share button.
If you successfully set up the software
See "After setting up the Share Button App" on page 11.
* If the App didn't start when you clicked Finish
The camera may have timed out. Unplug the camera from the USB cable
and turn it off. Plug it back in and turn it on. When the App starts,
perform the one-time setup, above.
10 www.kodak.com/go/support
Meijer.com