Creative Sound Blaster Wireless Headphones User Manual page 4

Step 3: Turn on headphones and Auto pair
Turn on your headphones. If you have two or more headphones, simply turn
on all of them. Your transmitter and headphones should pair automatically.
The Link LED flashes and then lights up green when pairing is successful.
NOTE
• If your transmitter and heaphones do not pair, simply reset
them. On one unit at a time, press and hold the Connect button
for five seconds. The LED flashes twice to indicate that the
headphones has been reset.
• Signal quality between the transmitter and headphones may be
affected by any object or structure (for example, multiple walls)
that is between the units. Experiment with different positions if
necessary.
OFF ON
Turn on headphones and Auto pair 3