Perimeter Partial ? (Command + 8); Partially Turn On The Perimeter - Bosch D1260 User Manual

Security System | User's Guide | Part II: System Commands - PERIMETER PARTIAL ? (COMMAND + 8)

PERIMETER PARTIAL ? (COMMAND + 8)

Partially Turn On the Perimeter

Description
This function is used to turn on the perimeter of your building
while selected portions of the perimeter remain turned off.
Perimeter points that are not secure (faulted) when this
function is entered are automatically bypassed and are not
included in the system. This function does not turn on the
interior of your building. Entry/exit delays are provided with
this arming command.
Use this function in residential systems to turn on the front of
your house while the interior and the rear perimeter doors are
left turned off, giving you freedom of movement between the
house and patio.
In commercial systems, when you need access to the large
overhead doors to receive deliveries, using this function will
allow you to keep the rest of the building perimeter armed.
Bosch Security Systems | 9/04 | 4998122475D
Using Perimeter Partial
1. Ensure your keypad shows idle
disarmed text.
Before using this function, decide which points are to be
left turned off. Fault the points (doors and windows) by
leaving them open. The points must remain open until
after the exit delay time expires.
COMMAND
2. Press the
3. The display shows *System
Command*.
8
4. Press the key.
key.
53