Electro-Voice MA-1206 Instruction Manual And Users Manual page 9

20. Input sensitivity switch (AUX1 , AUX2)
By turning switch onto the "1" position, the "AUX 1" , "AUX 2" input suitable for connected to CD
player signal output. By turning this switch onto the "2" position, the "AUX1","AUX2" input suitable
for connected to AM/FM radio signal output. By turning this switch onto the"3" position, the "AUX1"
"AUX2" input suitable for connected to desktop cassette player signal output. By turning this switch
onto the "4" position, the "AUX1", "AUX2" input suitable for connected to high-leven signal
output.
21. TEL. Paging input level control
This control let you set the volume of the sound source that is connected to the "Tel. Paging" (23)
turning control clockwise can increase the volume of the corresponding source. We recommend
to leave the control at it's minimum setting "0" when it is not used.
22. LINE OUTPUT CONNECTOR
This XLR output mixed audio signals of all sources that can be utilized to feed an external
power amplifier or an other external appliance.
23. Input "TEL.Paging"
It lets you connect to an auxiliary signal (600 ohms). The input features the "Voice Priority" function
, which overrides all other input signals, once an auxiliary message is sent. If you want to have this
function disabled forever, please contact an EV SERVICE CENTER.
24. "Priority" terminal
When short-circuiting these terminals (i.e means of using an electrical switch). The audio signals
coming form "AUX1", "AUX2","CASSETTE" and "TUNER" are attenuate, while the signals
coming form "IN1" , "IN2" and "IN4" are gaining priority.
25. Output terminal for auxiliary loudspeaker
The terminal is meant for the connection of a small external loudspeaker that gets driven by an internal
auxiliary power amplifier, providing a nominal output 1 watt. Only the mixed audio signal coming from
"AUX1" , "AUX2" "CASSETTE" and "TUNER" are included in the output signal. In addition, the
output signal is controlled only by the volume controls of the "AUX1","AUX2","TUNTER" and music
signal level control(4). This function is toggle switch the "MONITOR OUTPUT"(4) additional loudspeaker.
26. DC switch
This switch lets you turn the battery supply on or off.
1W / 8W Pr ority i
-
+
Auxiliary conctat
1W / 8W Pr ority i
-
+
+
1W 8 ohm
-
8
Aux. Paging
T R G
Aux. Paging
T R G