Electro-voice p1200 precision series power amplifier (23 pages)
Summary of Contents for Electro-Voice MA-1206
Page 1
Professional Mixer/Amplifier Professional Mixer/Amplifier MASTER INPUT5 INPUT6 INPUT7 INPUT8 INPUT9 INPUT10 BASS TREBLE + 10 + 10 Mute INPUT1 INPUT2 INPUT3 INPUT4 AUX1 AUX2 MONITOR OUTPUT POWER MA-1206 60 watt MA-1212 120 watt Professional Mixer/Amplifiers Instruction Manual and Users Guide...
Page 2
INSTALLATION NOTES At all times, the amplifier has to be operated under appropriate conditions. This includes that the operation location provided sufficient ventilation and the device is not exposed to direct sunlight or the direct radiation or reflection from any heat source. Installing the loudspeaker systems choose a location that gets not affected by extreme and / or constant vibration or other mechanical oscillation.
SAFETY PRECAUTIONS 1. Please read the notes proceeded by the symbol with special attention, as they provide important safety information. 2. The power supply voltage of the amplifier has a sufficiently high value to involve the risk of electrical shock; therefore, never install, connect, or disconnect the equipment with the power supply switched on.
MA-1212 Professional Mixer/Amplifier Professional Mixer/Amplifier MASTER INPUT5 INPUT6 INPUT7 INPUT8 INPUT9 INPUT10 BASS TREBLE + 10 + 10 Mute INPUT1 INPUT2 INPUT3 INPUT4 AUX1 AUX2 MONITOR OUTPUT POWER CONTROL AND FUNCTIONS 1. "Mute" function switch This switch lets you turn the "Voice Priority" on or off of input 1 (1). 2.
9.Common BASS-control Clockwise this control enhances the low frequency reproduction, while turning it counter clockwise attenuates the bass frequencies. If the control is set to its center position, the overall frequency response is not being altered. CAUTION: LINE LINE LINE LINE LINE LINE...
DC24V 10A 100V 100V 100V 100V Connecting the speakers to 100V output 15. "PRE OUT" terminal This terminal output the mixed audio signals of all sources that are connected to the amplifier Inputs and can be utilized to feed an external power amplifier, a signal processor (e.g.a equalizer) or any other external appliance.
Page 8
18. "INPUT 1 ~ INPUT 10" Inputs These ten balanced/unbalanced combination type jack (XLR and 6.3mm) input, Meant for the connection of-condenser type microphone that accept 24V phantom power, dynamic microphone (30-600ohms) or a high level sound source (e.g AM/FM tuner, cassette desk, CD player, ect.) In case you are using , it is necessary to use the switch (20).
Page 9
20. Input sensitivity switch (AUX1 , AUX2) By turning switch onto the "1" position, the "AUX 1" , "AUX 2" input suitable for connected to CD player signal output. By turning this switch onto the "2" position, the "AUX1","AUX2" input suitable for connected to AM/FM radio signal output.
Page 10
Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a damp cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. Do not defeat the safety purpose of the grounding-type plug.
Example of possible connections Microphone CD player Microphone stand AM/FM tuner Cassette recorder CD player Speaker AM/FM tuner Cassette player Contact "VOICE PRIORITY" CAUTION: LINE LINE LINE LINE LINE LINE ELECTRIC SHOCK HAZARD. DO NOT REMOVE COVER. WARNING RISK OF FIRE-REPLACE REFER SERVICING TO QUALIFIED PERSONNEL.
(3) years from the date of original purchase. Additional details are Included in the Uniform Warranty statement. Electro Voice 12000 Portland Avenue South, Burnsville , MN 55337 Phone: 952/884-4051, Fax:952/884-0043 www.electrovoice.com...
Page 16
U.S.A and Canada only. For customer orders, contact Customer Service at: 800/392-3497 Fax:800/955-6831 Europe, Afuica, and Middle East only. For customer orders, contact customer Service at: + 49 9427-706 0 Fax: + 49 9421-706 265 Other International locations. For customer orders, contact Customer Service at: + 1 952 884-4051 Fax: + 1 952 887-9212 For warranty repair or service information, contact the Service Repair department at: 800/685-2606...