Using Voice Command - Toshiba Pockey PC e800 User Manual

Mail Tab
■
The reading mail turns into a read: Once selected, the status of the
reading changes from read to unread.
■
Check at least one of the following: Read the name of the sender,
Read the subject, Read the date of receipt, or Read the message.
■
After reading wait for: Sets the time interval for reading the following
mail. To read the message while this setting is available, tap the
message area within the interval time. This message is only available
when the Read the message check box is cleared.
■
Default Value: Resets all the values to the default.

Using Voice Command

With Voice Command, you can operate Pocket PC "hands free" without
tapping or pressing buttons on your Toshiba Pocket PC e800.
The Voice Command application has 3 components:
■
Global Command: the command always available
■
User Command: the command that users can assign freely, always
available.
■
Command for each application: Command available only for the
foreground windows.
Installing the Voice Command
1. Make sure your Toshiba Pocket PC e800 is connected to your computer
and that an ActiveSync connection has been established.
2. Start the Voice Command installation by running the Setup program.
User's Manual
Optional Functions
11-25