Using Com Service; Using Dun/Lap Service - Toshiba Pockey PC e800 User Manual

Using COM Service

Establishing an ActiveSync connection with a computer
This section explains how to use COM service to connect to a computer.
Preparations
■
The computer to which you want to connect must be Bluetooth enabled
and have ActiveSync installed. Your Toshiba Pocket PC e800 must also
have been synchronized with the PC using a cradle or a cable at least
once to establish a "partnership' to the PC.
1. From the service list on the Bluetooth Settings screen, tap and hold on
the name of the COM service to which you want to connect, then tap
ActiveSync Registration or Connection Registration on the pop-up
menu. after this selection, an optional screen will appear.
If you select ActiveSync Auto Connect, ActiveSync will be performed
automatically and continuously. You need no more step.
When the connection registration is complete, the device and service
icons change to registered connection icons.
2. Tap OK.
The screen closes and the Today screen appears.
3. From the computer, set the port that you will use when you are
connecting with Bluetooth.
The computer is now ready to connect.
This operation may vary depending on the computer. Please refer to the
user's guide supplied with your computer for more information.
4. Tap Start, Programs, Bluetooth, and then Bluetooth Connection.
Your Toshiba Pocket PC e800 connects to the computer.
When the connection is complete, the Programs screen reappears.

Using DUN/LAP Service

Connecting to the Internet
This section explains how to use DUN service to connect to the Internet by
connecting to a modem or cell phone.
LAP service uses the same method of connection.
Preparations
■
To connect to a Bluetooth-enabled modem, tap Start, Settings
Connection tab, and then Connections, in the My ISP area, tap Add a
new modem connection. The Make New Connection screen
appears. From the Select Modem list, select Bluetooth Card.
User's Manual
Bluetooth
10-9