Changing A Bulb - Ford Focus 2012 Owner's Manual

Note: When fitting the headlamp, make
sure that you reconnect the electrical
connector properly.
Note: When fitting the headlamp, make
sure that you fully engage the headlamp in
the lower fixing point.
Note: When fitting the headlamp, make
sure that the screw is located in the
headlamp moulding before you install it.

CHANGING A BULB

WARNINGS
Switch the lights and the ignition off.
Let the bulb cool down before
removing it.
Have Xenon bulbs changed by a
properly trained technician. There is
a risk of electric shock.
CAUTIONS
Do not touch the glass of the bulb.
Only fit bulbs of the correct
specification. See Bulb
Specification Chart (page 64).
Note: The following instructions describe
how to remove the bulbs. Fit replacements
in the reverse order unless otherwise stated.
Headlamp
Note: Remove the covers to gain access to
the bulbs.
Lighting
A
E133102
A Side lamp
B Headlamp dipped beam
C Headlamp main beam
D Direction indicator
Direction indicator
1. Remove the headlamp. See
Removing a Headlamp (page 56).
3
E133104
2. Remove the cover.
3. Turn the bulb holder anti-clockwise
and remove it.
4. Gently press the bulb into the bulb
holder, turn it anti-clockwise and
remove it.
57
B C D
2