How To Operate The Cd/Mp3/Wma Player; About Compact Discs - Eclipse AVN2210p Owner's Manual

How to Operate the CD/MP3/WMA Player

About Compact Discs

• The signal recorded on a compact disc is read by a laser beam, so nothing touches the disc surface.
A scratch on the recorded surface or a badly warped disc may cause impaired sound quality or
intermittent playback. Observe the following precautions to ensure high quality sound performance:
Rough Edges
Ballpoint pen
Rough Edges
Flakes
Recorded surface
• Do not leave an ejected disc in the disc slot for very long; the disc may
warp. Discs should be stored in their cases and kept away from high
temperature and humidity.
• Do not stick pieces of paper or tape on disc. Do not write on or
scratch either side of a disc.
• Discs spin at a high speed inside the main unit. Keep cracked and
warped discs out of the player to avoid damage to the main unit.
• Avoid touching the recorded surface when handling a disc; handle
discs by their edges.
• You may notice that some brand new discs are rough around the
center hole or outside edge. Remove the rough edges with the side of
a ballpoint pen, etc. Rough edges may prevent proper loading in the
main unit. Flakes from the rough edges may also stick to the recorded
surface and interfere with playback.