Mounting Location - Rockford Fosgate PA2 Manual

M L
OUNTING OCATION
The mounting location for the PA2 should allow easy access to the controls for
making necessary adjustments. The PA2 will most likely be adjusted only at the
time of installation and will not need further adjustment unless changes to the
audio system are performed. To ensure optimum performance, care should be
taken when mounting the preamplifier in the following locations:
Engine Compartment
Mounting the PA2 in the engine compartment will void your warranty. The only
thing that should be mounted in the engine compartment is that big metal thing
that makes the vehicle go fast.
Instrument Panel
Mounting the PA2 in the instrument panel provides optimum access. The unit
should be securely mounted to ensure optimum safety.
Center Console
Mounting the unit in the center console provides optimum access. Be sure the
installation does not interfere with the operation of the gear shift or parking brake.
Glove Box
Mounting the unit in the glove box is adequate, but does not provide easy
access. Glove box mounting should only be done if "Instrument Panel" or "Center
Console" mounting is not acceptable (i.e., maintaining integrity of older vehicles
with metal dashboards).
Under Dash
Mounting the unit under the dash is adequate, but does not provide easy access.
Under dash mounting should only be done if "Instrument Panel" or "Center
Console" mounting is not acceptable. Mount the unit off to the side of the driver's
area to reduce interference with the parking brake, gear shift or operating pedals.
– 6 –