Media Storage; Output Tray - Konica Minolta PagePro 1390 MF User Manual

Media Storage

How do I store media?
Keep media on a flat, level surface in its original wrapper until it is time to
load it.
Media that has been stored for a long time out of its packaging may dry up
too much and cause misfeeding.
If media has been removed from its wrapper, place it in its original pack-
aging and store in a cool, dark place on a level surface.
Avoid moisture, excessive humidity, direct sunlight, excessive heat (above
35°C [95°F]), and dust
Avoid leaning against other objects or placing it in an upright position.
Before using stored media, do a trial print and check print quality.

Output Tray

All printed media is output to the face-down output tray. This tray has a
capacity of approximately 100 sheets (A4/Letter) of 80 g/m
If the media is stacked too high in the output tray, your machine may
experience media misfeeds, excessive media curl, or static buildup.
Remove transparencies as soon as possible from the output tray to
avoid static buildup.
Media Storage
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
2
(22 lb) paper.
27