TRENDnet TW100-S4W1CA User Manual page 13

2-1-3 Firmware Upgrade
Upgrading firmware for this Broadband Router improves functionality
and performance. Enter the path and name of the upgrade file then click
the APPLY button below. You will be prompted to confirm the upgrade.
While updating the firmware, please wait after pressing the APPLY
button, and follow the instructions on
the screen; the System Light on the
front panel will start blinking when
the firmware has been upgraded
successfully.
2-1-4 Configuration Tools
Use the "Backup Settings" tool to save the Broadband Router's current
configuration to a file
"config.bin" on your PC. You can then
use the "Restore Settings" tool to
restore the saved configuration of the
Broadband Router that was
previously. Select "Restore to Factory
Defaults" tool to force the Broadband
Router to reset and restore the original
factory settings.
•
Restore Factory Default
named
set
21
To restore the factory default settings of the Broadband Router,
select the "Restore Factory Default Configuration" option.
•
Backup Settings
Select the "Backup Settings" option to save the current settings in a
file called "config.bin," or save to a filename of your choosing.
•
Restore Settings
To restore the backup file to the Broadband Router, enter the path
and filename of the backup file (i.e. config.bin).
2-1-5 Status
The status screen will display the Broadband Routers' WAN/LAN
interfaces, firmware and hardware version numbers, and the number of
connected clients to the network.
2-1-6 System Log
View any attempts that have been made to gain access to the network.
22