VTech LS5146 Quick Start Manual

Quick start guide

for model LS5146
Install the telephone base
Install the telephone base as shown below.
DSL filter (not included) required
if you have DSL high-speed
Internet service
Electrical outlet
Telephone wall jack
not controlled by
a wall switch
Power adapter
Telephone
line cord
Telephone base
NOTES:
1. Use only the power adapter and battery
supplied with your VTech telephone.
2. For complete feature instructions, please refer
to your user's manual.

Battery installation and charging

Install the battery as shown below. For optimal
performance, charge the handset battery for at least
16 hours before use.
2. Insert the plug as
1. Press the tab and
slide the battery indicated. Make sure
it is plugged securely
compartment cover
and matches the
downwards.
color-coded label
inside the battery
compartment.
3. Place the battery 4. Align the cover flat
with the label against the battery
THIS SIDE UP facing compartment, then
up and the wires slide it upwards until it
inside the battery clicks into place.
compartment.
5. Charge the
handset by
placing it in the
telephone base.
The handset
charge light on
the handset
will be on when
charging.
Charge light
Pair your first
Bluetooth cell phone
To pair and connect your first Bluetooth cell phone:
1. Pr e s s C E L L o n t h e
telephone base.
Cellular operation
2. Press the YES softkey.
requires Bluetooth
connection.
Set up Cellular?
YES
3. Set your cell phone to search
Set up Cellular
for or add new devices, then
Set your Cellular to
search for devices,
press the NEXT softkey.
then press NEXT
NEXT
4. Once your cell phone finds
Set up Cellular
your VTech LS5146, select
VTech LS5146
in Discoverable Mode
it and then enter the PIN
PIN=0000
0000 on your cell phone.
STOP
5. When pairing is completed,
Set up Cellular
press the YES softkey on
Pairing complete
Connect to
the telephone base.
Cellular ?
YES
Cellular setup
completed
Pair your first
Bluetooth headset
To pair and connect your first Bluetooth headset:
Press the MENU softkey on
1.
the telephone base.
2. Press the UP and DOWN
N a v K e y s t o h i g h l i g h t
Bluetooth, then press the
SELECT softkey.
3. Press the UP and DOWN
NO
N a v K e y s t o h i g h l i g h t
Set up Headset, then press
the SELECT softkey.
4. S e t y o u r h e a d s e t t o
discoverable mode, then
press the NEXT softkey.
5. Once the telephone base
finds your headset, select
HELP
it and then press the PAIR
softkey.
6. Enter your headset's PIN
on the telephone base, then
NO press the DONE softkey.
The default PIN for most
headsets is 0000.
7. W h e n t h e p a i r i n g i s
completed, press the YES
softkey on the telephone
base.
Main Menu
Voice Mail
Intercom
Bluetooth
SELECT
Bluetooth
Set up Cellular
Set up Headset
Active Devices
SELECT
Set up Headset
Set your Headset in
Discoverable mode,
then press NEXT
NEXT
Headsets Found
Mary's Headset
FIND PAIr INFO
Set up Headset
Enter PIN:
0000
DONE HELP ErASE
Set up Headset
Pairing complete
Connect to
Headset ?
YES NO
Headset setup
completed