The Furniture Door - Zanussi DTI 6759 E Instruction Booklet

The furniture door

The door on this appliance is designed for the
overlay of a panel having the following dimensions:
Width 596 mm
Height 644 - 724 mm max
Thickness 20 mm max
Weight 2 - 7.5 kg max
The panel height should be no more than
indicated, otherwise complete opening of the
door will not be possible as the furniture door
panel will hit against the dishwasher plinth.
The height of the panel depends on the height of
adjacent kitchen units (see kitchen plinth
adjustment).
Mounting the furniture door onto the door:
The panel must be fitted with a handle, as the
dishwasher handle will be hidden by the panel.
1. Drill the panel with a Ø 2 x 14 bit according to
the dimensions given in the picture.
2. Screw the two fastening pivots in the holes
indicated in the picture.
3. Mount the decor panel by inserting the two
fastening pivots into the slotted holes of the
door. Lift the decor panel until perfect alignment
with the fascia panel is obtained.
4. Once the correct position has been found, open
the door and fasten the decor panel by means
of the six 4 x 40 screws provided, using the
holes through the inner door.
596 max
525
=
II92
II79
II80
51
=
PFI42GB