Securing Under A Counter - Zanussi IT 5614 Instruction Booklet

Mounting the furniture door onto
the door
The panel must be fitted with a handle, as the
dishwasher handle will be hidden by the panel.
1. Drill the panel with a Ø 2 x 14 bit according to the
dimensions given in the picture.
2. Screw the two fastening pivots in the holes
indicated in the picture.
3. Mount the decor panel by inserting the two
fastening pivots into the slotted holes of the door.
Lift the decor panel until perfect alignment with the
fascia panel is obtained.
4. Once the correct position has been found, open the
door and fasten the decor panel by means of the
six 4 x 40 screws provided, using the holes through
the inner door.

Securing under a counter

Secure the dishwasher to the counter on the front part
by means of two 3.5 x 16 screws provided (see fig. -
point A).
The dishwasher must be secured against tilting.
Therefore, make sure that the counter it is fitted under,
is suitably secured to a fixed structure (adjacent
kitchen cabinets, wall).
Attention!
The sides of the dishwasher must never be
drilled to prevent damage to hydraulic
components.
446 max 596 max
400
525
=
II92
II97
II103
II80
A
II100
22
=