Xerox WorkCentre 7775 Specifications page 5

Xerox WorkCentre
®
Output Option – Light Production Finisher
Capacity
1
Sizes
Weights
Stapling
1
Hole Punch
Booklet Maker
Capacity
1
Post Process Interposer
Output Option – Convenience Stapler
Capacity
1
Print Specifications
Network Printing – Smart Controller (Simultaneous rip, receive, program ahead, queue processing and transmit)
Processor
Memory (ESS)
System Disk
Print Languages (PDL)
Network Printing – Resolution (printing via CentreWare
Network Printing – Printing Features
Paper capacities are based on 20 lb/75 gsm stock; capacities will vary with different weight stocks.
1
7775
®
Top Tray: 500 sheets
Lower Tray: 2,000 sheets 20 lb bond 8.5 x 11 in. size (75 gsm, A4/210 x 297 mm)
4 x 6 in. SEF to 13 x 19 in. SEF (101.6 x 152.4 mm to 330.0 x 482.6 mm)
17 lb bond to 170 lb index (64 to 300 gsm)
Up to 100 sheets 20 lb bond (75 gsm)
North America
2-3 Hole Punch
Bi-folded booklets (5 sheets maximum)
Saddle-stitched and Center folded booklets (15 sheet maximum)
200 sheet capacity
50-sheet stapling
5,000 staples
Requires a separate outlet
1.33 GHz Freescale
2 GB
160 GB minimum
PCL 6 / PCL 5e emulation
Adobe PostScript 3™
® ®
TIFF (6.0 Old JPEG and New JPEG)
TIFF Fax Extended (TIFF - FX)
PDF
LCDS, SCS, XES and IPDS through 3rd-party transforms
®
PostScript: 600 x 600 dpi and 1200 x 1200 dpi (up to 256 shades of gray)
PCL: 600 x 600 dpi
Supports PCL and PS switching within job
Bi-directional Print Drivers provide device and job status
Embedded Web server for remote control/monitor/setup
Job monitoring at the device and at desktop
Special font
Banner Sheet
Rotate Image
Offset
Support PCL and PS switching
Custom Macintosh Driver (Watermark, Booklet Creation, JBA, Secure, Sample, Delay Print)
Support for Print on Tabs / Page Segmentation
Linearized PDF
Save and restore print job settings
Europe
2-4 Hole Punch
Swedish 4-Hole Punch (Optional)
software)
Detailed Specifications 5