TYAN S7040 User Manual page 98

3.8.1 - System Event Log
SEL Components
Change this to enable or disable all features of System Event Logging during boot.
Disabled / Enabled
NOTE: The following items can be configured when SEL Components is set to
[Enabled].
Erase SEL
Choose options for erasing SEL.
No / Yes, on next reset / No, on every reset
When SEL is Full
Choose options for reactions to a full SEL.
Do Nothing / Erase Immediately
Log EFI Status Codes
Disable the logging of EFI Status Codes or log only error code or only progress
code or both.
Both / Disabled / Error Code / Progress Code
98
http://www.TYAN.com