Table 15: Power Unit Status Sensors Typical Characteristics; Table 16: Power Unit Status Sensor - Sensor Specific Offsets - Next Steps - Intel S1400FP Manual

System Event Log Troubleshooting Guide for EPSD Platforms Based on Intel
Sensor Specific Offset
Hex Description
00h Power down
02h 240 VA power down
04h A/C Lost
Revision 1.1

Table 15: Power Unit Status Sensors Typical Characteristics

Byte Field
11 Sensor Type 09h = Power Unit
12 Sensor Number 01h
13 Event Direction and [7] Event direction
Event Type
[6:0] Event Type = 6Fh (Sensor Specific)
[7:6] – 00b = Unspecified Event Data 2
14 Event Data 1
[5:4] – 00b = Unspecified Event Data 3
[3:0] = Sensor Specific offset as described in Table 16
15 Event Data 2 Not used
16 Event Data 3 Not used
Table 16: Power Unit Status Sensor – Sensor Specific Offsets – Next Steps
Description
System is powered down.
240 VA power limit was exceeded and the
hardware forced a power down.
A/C power was removed.
Intel order number G90620-002
Xeon Processor E5 4600/2600/2400/1600/1400 Product Families
® ®
Description
0b = Assertion Event
1b = Deassertion Event
Informational Event
This could have been caused by many things.
1. If you recently added hardware, try removing it.
2. Remove/replace any add-in adapters.
3. Remove/replace the power supply.
4. Remove/replace the processors, DIMM, and/or hard drives.
5. Remove/replace the boards in the system.
Informational Event
Power Subsystems
Next Steps
35