Use; Control Panel; Controls - Zanussi FLS 804 X Instruction Booklet

Use

Control panel

Temp.
Blancos A B 60º- 90º
B
Colores 40º- 60º
Sintéticos H J 40º- 60º
K
Delicados 30º- 40º
Lana L 30º- 40º
1 Programme chart
It will help you to choose the most suitable washing
programme for your laundry.
2 Spin speed reduction button
By depressing this button the spin speed is reduced
as follows:
l
cotton and linen: from 800 to 400 rpm
l
synthetics, delicates and wool: from 750 to
400 rpm.
3 Intensive rinse button
By depressing this button on programmes for cotton
and linen the machine will perform the rinses with
high water level.
To be used in areas where the water is very soft or
for people allergic to detergents or who have very
delicate skin.
4 Half load button
Select this button to reduce water consumption on
the rinse cycle when washing a smaller load of
cottons or linens (max. load size=2.25 kg).
5 Anti-crease button
Use only with "gentle" programmes for synthetics,
delicates and wool.
The last rinse water is not emptied out, so as to
avoid creasing if the laundry is not removed from the
machine immediately after washing.
The water can be emptied out by pressing the button
again (emptying will be followed by a short spin) or
by selecting the drain programme "Q".
If the button is not pressed, the programmes end
with a short spin.
Temp.
Lavado rápido C 30º- 40º
D M
Aclarados
Suavizantes F N
G P
Centrifugado
Descarga Q
1 2 3 4 5
6 Temperature selector dial
(thermostat)
To select the washing temperature turn the dial to
the required value.
When your laundry is only lightly soiled, a cold wash
can be used (dial to position
7 Mains-on light
It comes on when the machine starts operating and
goes out at the end of the programme.
8 Programme selector dial/
ON/OFF switch
To select the required programme, turn this dial
clockwise until the programme letter is exactly
opposite the pointer.
To start the programme pull the dial outwards.
To switch the machine off depress the dial.
30
6 7 8
).