Other Features; Set The Alarm Timer; Set The Sleep Timer - Philips DTD3190 User Manual

11 Other features

Set the alarm timer

This unit can be used as an alarm clock. You
can select CD, FM, USB, or iPod/iPhone/iPad as
alarm source.
Note
•
Make sure that you have set the clock correctly.
1
In standby mode, press and hold TIME/
SLEEP for more than two seconds.
» The hour digits are displayed and begin
to blink.
2
Press / (or +/-) repeatedly to set hour.
3
Press TIME/SLEEP to confirm.
» The minute digits are displayed and
begin to blink.
4
Repeat steps 2-3 to set minute, select a
source (disc, USB, tuner, or iPod/iPhone/
iPad), and adjust volume.
Note
•
If no button is pressed in 90 seconds, the system exits
timer setting mode automatically.
To activate or deactivate the alarm timer:
Press TIME/SLEEP repeatedly to activate or
deactivate the alarm.
» If timer is activated,
Tip
•
If disc/USB/iPod/iPhone/iPad source is selected, but no
disc is placed or no USB/iPod/iPhone/iPad connected,
the system switches to the tuner source automatically.
is displayed.

Set the sleep timer

To set the sleep timer, in turn on mode, press
TIME/SLEEP repeatedly to select a set period
of time (in minutes).
» When sleep timer is activated,
displayed.
To deactivate sleep timer:
Press TIME/SLEEP repeatedly until [SLP OFF]
(sleep off) is displayed.
» When sleep timer is deactivated,
disappears.
is
EN 21