Invacare   Storm Arrow Service Manual page 34

WARNING
Do not adjust the position of the seat sup-
port bracket in this procedure. If an ad-
justment is desired, refer to ADJUSTING
WEIGHT DISTRIBUTION in PROCEDURE 15 -
MWD WHEELCHAIRS, PROCEDURE 16 - RWD
WHEELCHAIRS, or PROCEDURE 17 - FWD
WHEELCHAIRS of this manual.
WARNING
When installing seat support bracket, en-
sure the mounting screws are threaded
into the T-Nuts located inside the channel
of the base frame.
FIGURE 2 - REPLACING SEAT SUPPORT BRACKETS
REPLACING SEAT SUPPORT
BRACKET T-NUTS (FIGURE 3)
WARNING
The seat stop screws must be in place be-
fore operation of your power wheelchair.
Ensure the T-Nut(s) are positioned between
both seat stop screws.
FIGURE 3 - REPLACING SEAT SUPPORT BRACKET
T-NUTS