Checking And Repairing Of Cd Servo P.c.b - Panasonic SA-AKX52PH Service Manual

11.6. Checking and Repairing of CD
Servo P.C.B.
Step 1 Remove Top Cabinet.
Step 2 Remove Front Panel Unit.
Step 3 Remove D-Amp P.C.B..
Step 4 Remove SMPS Chassis Unit.
Step 5 Remove CD Mechanism Unit (BRS1C).
Step 6 Position Front Panel Unit, SMPS Chassis Unit & D-Amp
P.C.B. as diagram shown.
Step 7 Position CD Mechanism Unit (BRS1C) on the insulated
material.
Step 8 Attach 30P FFC to the connector (CN2000) on Main
P.C.B..
Step 9 Attach 30P FFC to the connector (CN2003) on Main
P.C.B..
Step 10 Attach 17P FFC to the connector (CN5050) on D-Amp
P.C.B..
Step 11 Attach 15P Cable Wire to the connector (CN5802) on
SMPS P.C.B..
Step 12 Latch D-Amp P.C.B. onto Inner Chassis.
Step 13 Attach 6P Cable Wire to the connector (CN5801) on
SMPS P.C.B..
Step 14 Attach 27P FFC to the connector (CN7002) on CD
Servo P.C.B..
Step 15 CD Servo P.C.B. can be checked and repaired as dia-
gram shown.
70