11.5. Checking and Repairing of
SMPS P.C.B.
Step 1 Remove Top Cabinet.
Step 2 Remove Front Panel Unit.
Step 3 Remove D-Amp P.C.B..
Step 4 Remove SMPS P.C.B..
Step 5 Position Front Panel Unit, SMPS P.C.B. & D-Amp P.C.B.
as diagram shown.
Step 6 Position SMPS P.C.B., D-Amp P.C.B. on the insulated
material.
Step 7 Attach 30P FFC to the connector (CN2000) on Main
P.C.B..
Step 8 Attach 30P FFC to the connector (CN2003) on Main
P.C.B..
Step 9 Attach 17P FFC to the connector (CN5050) on D-Amp
P.C.B..
Step 10 Extend the Cable Wire with extension Cable Wire
(REXX1206) (15P Cable Wire from ZJ2007 to CN5802).
Step 11 Connect 6P Cable Wire to the connector (CN5801) on
SMPS P.C.B..
Step 12 SMPS P.C.B. can be checked & repaired as diagram
shown.
69