Alarm Out; Serial In; Record - Toshiba HDS-M5200 series User Manual

The Alarm In menu will allow user to give title and to select the type of Alarm input.
Click ( ) the keyboard icon on the right-hand side of each frame on Title column and the virtual keyboard will appear. Then,
please register the title of Alarm input.
When a check box is marked
check box, the operation stops.
Click ( ) each frame on Type column to select type of a corresponding Alarm input.
–
NO: contact is normally open (Normally open)
–
NC: contact is normally closed (Normally closed)
Choose 'OK' to confirm setting.
4.4.5

Alarm Out

Please click ( ) DEVICES>Alarm Out and the following screen will appear.
The Alarm Out menu will allow user to give title and to select the type and duration of Alarm output.
Click ( ) the keyboard icon on the right-hand side of each frame on Title column and the virtual keyboard will appear.
Then, please register the title of Alarm output.
When a check box is marked
check the check box, the operation stops.
Click ( ) each frame on Type column to select type of a corresponding Alarm output.
–
NO: contact is normally open (Normally open)
–
NC: contact is normally closed (Normally closed)
Click ( ) each frame on Duration column to select duration (i.e., 1 second ~3 hours) of a corresponding Alarm output.
Choose 'OK' to confirm the setting.
4.4.6

Serial In

(NOTE)
Please refer to "12. Serial In".
4.5

RECORD

Please click ( ) RECORD and the following screen will appear.
on No column, a corresponding Alarm starts operating. However, if user does not check the
on No column, a corresponding Alarm output starts operating. However, if user does not
35