Motion Detection - Toshiba HDS-M5200 series User Manual

Each frame on Title column shows camera title registered in DEVICES>Camera/PTZ. User cannot change camera titles
here.
Click ( ) each frame on Resolution column to select recording resolution of a corresponding camera. User may select one
of 720x480, 720x240 and 360x240.
Click ( ) each frame on Frames column to select recording rate of a corresponding camera. Recording rate varies by
camera. Below lists the maximum recording rate of each camera.
Click ( ) each frame on Quality column to select recording quality of a corresponding camera. User may select one of
Super, High and Std.
Click ( ) each frame on Duration column to select recording duration (i.e., 1 second ~ 3 hours) of a corresponding camera.
Choose 'OK' to confirm the setting.
4.5.4

Motion Detection

Please click ( ) RECORD>Motion Detection and the following screen will appear.
The Motion Detection menu will allow user to set Motion detection alarm.
Press SETUP key (or right mouse button) and the SETUP menu will appear.
SETUP menu descriptions.
–
Camera: select camera for setup.
–
Sensitivity: select sensitivity (Low, Normal and High)
–
Reverse Vert: activate the entire column at the cursor's position.
–
Reverse Horz: activate the entire row at the cursor's position.
–
Select All: active all blocks.
–
Deselect All: deactivate all blocks.
–
Copy to All Cameras: The present channel setup applies to all other cameras. Only when click save button, the
changed setup can be saved.
–
Save: save the new settings and go back to previous menu (page).
–
Exit: ignore the new settings and go back to previous menu (page).
NTSC(PAL)
4 Channel DVR
8 Channel DVR
16 Channel DVR
360x240 720x240
120(100) 120(100)
240(200) 120(100)
480(400) 240(200)
39
720x480
60(50)
60(50)
120(100)