Grandstream Networks HandyTone-496 User Manual page 27

HandyTone-496 User Manual
Syslog Level
Individual Account Settings
SIP Server
Outbound Proxy
SIP User ID
Select the ATA to report the log level. Default is NONE. The level is one of
DEBUG, INFO, WARNING or ERROR. Syslog messages are sent based on
the following events:
• product model/version on boot up (INFO level)
• NAT related info (INFO level)
• sent or received SIP message (DEBUG level)
• SIP message summary (INFO level)
• inbound and outbound calls (INFO level)
• registration status change (INFO level)
• negotiated codec (INFO level)
• Ethernet link up (INFO level)
• SLIC chip exception (WARNING and ERROR levels)
• memory exception (ERROR level)
The Syslog uses USER facility. In addition to standard Syslog payload, it
contains the following components:
GS_LOG: [device MAC address][error code] error message
Here is an example: May 19 02:40:38 192.168.1.14 GS_LOG:
[00:0b:82:00:a1:be][000] Ethernet link is up
This field contains the URI string or the IP address (and port, if different from
5060) of the SIP proxy server. e.g., the following are some valid examples:
sip.my-voip-provider.com, or sip:my-company-sip-server.com, or
192.168.1.200:5066
This field contains the URI string or the IP address (and port, if different from
5060) of the outbound proxy. If there is no outbound proxy, this field
SHOULD be left blank. If not blank, all outgoing requests will be sent to this
outbound proxy.
This field contains the user part of the SIP address for this phone. e.g., if the
SIP address is: sip:my_user_id@my_provider.com, then the SIP User ID is:
my_user_id. Please do NOT include the preceding "sip:" scheme or the host
portion of the SIP address in this field.
Grandstream Networks, Inc
27
.