Grandstream Networks HandyTone-496 User Manual page 19

HandyTone-496 User Manual
End User
Password
IP Address
Time Zone
Device Mode
Cloned WAN MAC
Address:
LAN Subnet Mask
Daylight Savings Time This parameter controls whether the displayed time will be daylight savings
LAN DHCP Base IP:
0
WAN port LAN IP
0
WAN port LAN IP
0
WAN port LAN IP
0
WAN port LAN IP
0
WAN port
UDP Only
Update
All Rights Reserved Grandstream Networks, Inc. 2005
This contains the password to access the Web Configuration Menu. This
field is case sensitive.
There are 2 modes under which the HandyTone ATA can operate:
- If DHCP mode is enabled, then all the field values for the Static IP mode
are not used (even though they are still saved in the Flash memory.) The
HandyTone ATA will acquire its IP address from the first DHCP server it
discovers from the LAN it is connected.
To use the PPPoE feature the PPPoE account settings need to be set. The
HandyTone will attempt to establish a PPPoE session if any of the PPPoE
fields is set.
- If Static IP mode is enabled, then the IP address, Subnet Mask, Default
Router IP address, DNS Server 1 (primary), DNS Server 2 (secondary) fields
will need to be configured. These fields are reset to zero by default.
This parameter controls how the displayed date/time will be adjusted
according to the specified time zone.
To use the device as a router or a bridge.
Allow the user to set a specific MAC address. Set in Hex format
Sets the LAN subnet mask. Default value is 255.255.255.0
time or not. If set to "Yes", the displayed time will be 1 hour ahead of
normal time.
Base IP for the LAN port which functions as a Gateway for the subnet.
Default value is 192.168.2.1
Grandstream Networks, Inc
LAN port
LAN port
LAN port
LAN port
LAN IP
Cancel Reboot
19
0 UDP Only
Protocol
0 UDP Only
Protocol
0 UDP Only
Protocol
0 UDP Only
Protocol
0
LAN port
.
Protocol