Table of Contents
Advertisement
HandyTone-496 User Manual
Layer 3 QoS:
Layer 2 QoS: 802.1Q/VLAN Tag
STUN server is :
keep-alive interval:
Firmware Upgrade and
Provisioning: Upgrade Via
Firmware Key:
FXS Impedance:
Caller ID Scheme:
Onhook Voltage:
Polarity Reversal:
Reply to ICMP on WAN port:
WAN side http access:
Syslog Server:
48
stun.mycompany.com
20
Use NAT IP:
Firmware Server Path:
Config Server Path:
Firmware File Prefix:
Config File Prefix:
Automatic Upgrade:
No
Always Check for New Firmware
Check New Firmware only when F/W pre/suffix changes
600 Ohm
Bellcore (North America)
36V
No
time.nist.gov
NTP Server:
No
No
No)
NONE
Syslog Level:
Update
All Rights Reserved Grandstream Networks, Inc. 2005
(Diff-Serv or Precedence value)
0
802.1p priority value
(URI or IP:port)
(in seconds, default 20 seconds)
(used in SIP/SDP message if specified)
TFTP
fm.grandstream.com/gs
fm.grandstream.com/gs
Yes, check for upgrade every
(North A
merica)
Yes (reverse polarity upon call establishment and termination)
(URI or IP address)
Yes (Unit will not respond to PING from WAN side if set to No)
Yes (WAN side access to http server will be rejected if set to
Cancel
Reboot
22
Grandstream Networks, Inc
0
HTTP
Firmware File Postfix:
Config File Postfix:
10080
minutes (default 7 days)
(in Hexadecimal Representation)
.
(0-7)
Advertisement
Table of Contents
