Heatilator CD4236IR-C Owner's Manual page 65

B. Vent Components Diagrams (continued)
PVI-SLP
Power Vent Inline
12-1/2 IN.
(318 mm)
8-1/8 in.
(206 mm)
15 in.
(381 mm)
Figure 16.6 DVP vent components
13-5/8 IN.
346 mm
12-1/2 IN.
318 mm
20-3/4 IN.
527 mm
16 IN.
406 mm
9-3/16 IN.
(233 mm)
13-5/8
(346 mm)
SLP-LPC
SLP Low Profi le Cap
13 in.
(330 mm)
WARNING
Fire Risk.
• When using DVP-HRC-SS and DVP-HRC-ZC-
SS termination caps on top vented fi replaces, a
6 inch minimum vertical vent section is required
before installing fi rst elbow.
DVP-HRC-SS
DVP-HRC-ZC-SS
HORIZONTAL TERMINATION CAP
Heatilator • CD4236IR-C, CD4842IR-C • 2207-900 Rev. L • 3/14
Optional Wire Harness
DESCRIPTION
10 ft. PV Wire Harness
20 ft. PV Wire Harness
40 ft. PV Wire Harness
60 ft. PV Wire Harness
80 ft. PV Wire Harness
100 ft. PV Wire Harness
Note: Wire harnesses required to power the PVI-SLP
connect to the appliance and are ordered separately from
PVI-SLP. Contact your dealer to order.
Note: Use only approved termination caps with the PVI-
SLP. See instructions included with PVI-SLP kit.
4-1/2 IN.
114 mm
16-11/16 IN.
424 mm
Effective Length
5-3/4 to 8-3/8 in. 5-1/2 in. 8-3/8 in.
146 to 213 mm 140 mm 213 mm
3°
87°
PART NUMBER
PVI-WH10
PVI-WH20
PVI-WH40
PVI-WH60
PVI-WH80
PVI-WH100
15 IN.
(381 mm)
16-11/16 IN.
(424 mm)
10-1/2 in.
267 mm
10-7/8 in.
276 mm

65