Advertisement
Quick Links
BARRIER FREE
COMRADE™ WALL-HUNG LAVATORY
• Wall-hung sink
• Vitreous china
• Rear overflow
• Soap depression
• Faucet ledge (faucet not included)
❏
0124.024 With wall hanger (Illustrated)
Faucet holes on 102mm (4") centers
❏
0124.131 For concealed arms support
Faucet holes on 102mm (4") centers
Nominal Dimensions:
508 x 464mm
(20" x 18-1/4")
Bowl sizes:
381mm (15") wide
276mm (10-7/8") front to back
159mm (6-1/4") deep
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2 for Vitreous China Fixtures
To Be Specified:
❏ Color: ❏ White ❏ Bone ❏ Silver
❏ Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
❏ Nipple:
❏ Concealed Arms Support (by others):
* See faucet section for additional models available
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDE-
LINES AND ANSI A117.1 ACCESSIBLE AND USABLE
BUILDINGS AND FACILITIES - CHECK LOCAL CODES.
Top of front rim mounted 864mm (34") from finished floor.
© 2008 AS America Inc.
WALL-HUNG LAVATORY
64mm
(2-1/2)
FINISHED
WALL
S-9 HANGER
76mm
(3)
*
108mm
286mm
(4-1/4)
(11-1/4)
11mm (7/16) DIA.
ANCHOR SCREW
*
HOLES
349mm
(13-3/4)
POP-UP WASTE
OUTLET 1-1/4 O.D.
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND "P" TRAP
ARE SUGGESTED.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2. These
measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
M26
COMRADE™
VITREOUS CHINA
102mm
(4)
171mm
(6-3/4)
464mm
(18-1/4)
C/L
508mm
(20)
8mm x 27mm
(5/16 x 1-1/16) SLOTS
54mm (2-1/8) DIA.
419 mm
HOLES FOR
(16-1/2)
CONCEALED ARMS
267mm
38mm
(10-1/2)
(1-1/2)
64mm
(2-1/2)
203mm
(8)
*
235mm
(9-1/4)
203mm
SUPPLIES
(8)
AS REQ'D.
DRAIN PLUG WASTE
OUTLET 1-1/4 O.D.
FINISHED
FLOOR
Revised 8/05
787mm (31)
864mm (34)
Advertisement
