System Administration - Trigger - D-Link DCS-1000 Manual

System Administration – Trigger
The Trigger menu contains commands for the I/O Trigger connectors
providing the physical interface for 2 digital output and 2 digital input that is
used for connecting a diversity of external alarm devices to DCS-1000 such as
IR-Sensor and alarm relay.
Click on "Trigger" in the system administration menu bar and the Trigger
screen will appear as illustrated below:
Click on "Home" to
return to Home Screen
The default setting for the I/O Trigger functions are disabled you must enable
the I/O Trigger first before the Triggers will perform.
There are two options to select from the Trigger screen I/O Input 1 Trigger
and I/O Input 2 Trigger.
I/O Input 1 Trigger:
Select "Send e-mail attached with image" and enter the relevant information
such as the SMTP Server Address, Sender e-mail Address, Receiver e-mail
Address, Sending Interval and Sending Times.
23