CNET CWR-854 User Manual page 64

Client can't connect to the
AP/Router's configuration
utility.
wireless radio button might be
in the off position
• Wrong IP address
64
configured to start
automatically.
• A wireless network adapter
driver failing in early stages of
service startup may result in
the Wireless Zero
Configuration or Wireless
Configuration service not
initializing over that interface.
• Make sure that your PC is
using an IP address within the
correct range. It should be
192.168.1.2 to 192.168.1.254
for the default value.
• Make sure that the address
of the subnet mask is
255.255.255.0.
• Try to use "Ping" utility to ping
the AP/Router's IP, the default
IP should be at 192.168.1.253
or 192.168.1.254 for AP and
Router respectively.