Firewall; Port Filtering - CNET CWR-854 User Manual

3.5 Firewall

3.5.1 Port Filtering

When enabled packets are denied access to Internet/filtered based on their port address.
Enable Port Filtering: Enable the Port Filtering function.
Port Range: Enter the Port range (1 to 65535) that are to be blocked..
Protocol: Protocols to be blocked UDP, TCP or both.
Comment: Allow user to add any comments for this port range.
Apply Changes: Click on "Apply Changes" to save the settings.
Reset: Click on "Reset" to undo your changes.
Current Filter Table: A table showing current port filtering.
Delete Selected: Select and delete any listed port range.
Delete All: Delete all the port ranges in the Current Filter Table.
Reset: Click on "Reset" to undo your changes.
47