Ip Filtering - CNET CWR-854 User Manual

3.5.2 IP Filtering

When enabled, LAN clients are blocked / filtered from accessing the Internet based on their IP
addresses.
Enable IP Filtering: Enable the IP Filtering function.
Local IP Address: IP address that is to be blocked from accessing the Internet.
Protocol: Select the protocol to be blocked UDP, TCP or both .
Comment: This field is used for adding comments for each access control entry.
Apply Changes: Click on "Apply Changes" to save the settings.
Reset: Click on "Reset" to undo your changes.
Current Filter Table: A table shows the list of current IP Addresses filtered.
Delete Selected: Select and delete any IP Address in the Current Filter Table.
Delete All: Delete all listed IP Address in the Current Filter Table.
Reset: Click on "Reset" to undo your changes.
48