Table of Contents
Advertisement
How to run a wash cycle 11
End of the programme
The
washing
machine
stops
automatically
;
the
"Start/Pause"
pushbutton goes out and the light "End"
comes on. The lid can only be opened
around 2 minutes after the washing
machine has come to a stop.
Turn the programme selector to the
"Off" position.
Remove washing
Unplug and close water inlet tap.
We recommend leaving the lid and drum
open after use to ventilate the water
tank.
Standby mode
If the appliance is on but no commands
are selected for 10 min before or after a
cycle, it goes into standby mode. All the
lights go out and "Start/Pause" flashes
slowly.
To exit standby mode, simply press any
pushbutton or turn the programme
selector.
Advertisement
Table of Contents
