Zanussi ZWT 7121 User Manual page 19

Problems
The "Start/Pause"
pushbutton** flashes
red***:
The "Start/Pause"
pushbutton** flashes
red***:
Softener runs directly into
the drum when filling the
dispenser box :
* Depending on model.
**On some models, the audible signals can sound.
*** After solving any problems, press the 'Start/Pause' pushbutton to restart the
interrupted programme.
Causes
• the drainage filter is obstructed,
• the drain hose is blocked or bent,
• the drain hose is fixed too high (see "Installa-
tion" section).
• the drainage pump is blocked,
• the standpipe is blocked.
• the water inlet tap is closed,
• the water supply has been cut off.
• you have gone past the MAX indicator.
operating problems 19