q
e
q
w
EJU00705
ENGINE STOP SWITCH
The engine can be stopped normally by
pressing the red button
GP7-018
EJU00706a
ENGINE STOP LANYARD SWITCH
The engine can be also stopped if you fall
off, or in case of an emergency, when the
lock plate
pulled out from the engine stop lanyard
switch
Should the lock plate be removed for any
reason, the engine stops by itself.
GP7-017
Always attach the engine stop switch
lanyard (cable) to your left wrist
BEFORE starting the engine.
To prevent accidental starting of the
engine, always remove the lock plate
from the stop switch when the engine
is not running.
GP7-019
NOTE:
When the red button on the engine stop
switch is pushed, without removing the
lock plate, the ignition circuit opens and
stops the engine immediately.
2-7
.
attached to the lanyard
.
E
is