Aligning The Skis; Adjusting The Handlebar - Yamaha VK10L Owner's Manual

Hide thumbs Also See for VK10L:
Table of Contents

Advertisement

CAUTION :
@
The right and left adjusters should be turned to an
equal amount.
@
6. Recheck alignment and deflection. If necessary,
repeat steps 3 to 5 until the proper adjustment is
achieved.
7. Tighten the rear axle nut.
Rear axle tightening torque:
80 Nm (8.0 m·kgf, 58 ft·lb)
ESU02001

Aligning the skis

1. Turn the handlebar so the skis face straight ahead.
2. Check the following for ski alignment:
a. Skis are facing forward.
b. Ski toe-out (1 – 2) is within specification.
Ski toe-out (1 – 2): 0–15 mm (0–0.59 in)
3. If the alignment is not correct, consult a Yamaha
dealer.
ESU03543

Adjusting the handlebar

1. Remove the handlebar cover 1.
2. Loosen the handlebar bolts.
8-25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents