Shifting; To Start Out And Accelerate - Yamaha BIG BEAR 400 Owner's Manual

EBU12951

Shifting

This model has a 5-speed forward and
1-speed reverse transmission with centrifugal
automatic clutch. The transmission allows you
to control the amount of power you have avail-
able at a given speed or for starting, acceler-
ating, climbing hills, etc.
To shift into neutral, return the throttle lever to
the closed position and repeatedly depress
the shift pedal until it stops.
To shift into reverse, first shift into neutral, and
then turn the reverse knob as explained on
page 6-4. Depress the shift pedal, and then
release the reverse knob.
1. Shift pedal N. Neutral position R. Reverse position
6-5
CAUTION:
_
Do not coast for long periods with the en-
gine off, and do not tow the ATV a long dis-
tance. Even in the neutral position, the
transmission is only properly lubricated
when the engine is running. Inadequate lu-
brication may cause damage.
_
EBU00205

To start out and accelerate:

1. Release the throttle lever.
CAUTION:
Always close the throttle while shifting
gears. Otherwise, damage to the engine
and drive train may result.
2. Shift into first gear and release the shift
pedal.
3. Open the throttle gradually.