Auxiliary Dc Jack - Yamaha BIG BEAR 400 Owner's Manual

Standard position: B
A - Minimum (soft)
E - Maximum (hard)
1. Special wrench
EBU01002

Auxiliary DC jack

The auxiliary DC jack is located at the front
right side of the ATV. The auxiliary DC jack
can be used for suitable work lights, radios,
etc. The auxiliary DC jack should only be used
when the engine is running.
1. Set the light switch to "OFF".
2. Start the engine. (See pages 6-1–6-3.)
3. Open the auxiliary DC jack cap, and then
insert the accessory power plug into the
jack.
Maximum rated capacity for the auxiliary
DC jack:
DC 12 V, 120 W (10 A)
4. When the auxiliary DC jack is not being
used, cover it with the cap.
4-19