Formatting Usb Flash Memory - Yamaha AVANT GRAND N1 Owner's Manual

Table of Contents

Advertisement

Formatting USB Flash Memory

Certain USB flash memory devices may require formatting before they can be used by this instrument. Before
using a USB flash memory device, be sure to read "Precautions when using the USB [TO DEVICE] terminal" on
page 26.
NOTICE
If you format a USB flash memory that already contains data, all of the data will be erased. Be
careful not to erase important data when using the format function.
1
1
Engage the Format mode.
After connecting the USB flash memory device to be formatted to the instru-
ment, press the [RECORD] button while holding the [FUNCTION] button.
For
The message "
" (Format) appears on the display.
2
Start Formatting.
After pressing the [PLAY/STOP] button, a "
play. Press the [+] button to execute the formatting operation. Press the [-] button
to cancel formatting.
When the formatting is finished, "
onds.
NOTICE
Do not turn off the power to the instrument or disconnect the USB flash memory device,
while the instrument is formatting the USB device (while "- - -" is displayed ). Doing so
may damage the data or the USB flash memory itself.
3
Exit from the Format mode.
Press any one of the buttons.
2
n Y
" message appears on the dis-
End
" appears on the display for three sec-
For
N1
• 29
Owner's Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avantgard n1Avantgrand n1

Table of Contents