Final Gear Oil - Yamaha WOLVERINE YFM45FXV Owner's Manual

12. Start the engine and warm it up for seve-
ral minutes. While warming up, check for
oil leakage. If oil leakage is found, turn
the engine off immediately and check for
the cause.
13. Turn the engine off, and then check the
oil level and correct it if necessary.
14. Install panel D.
EBU11453

Final gear oil

Checking the final gear oil
1. Place the ATV on a level surface.
2. Remove the oil filler bolt, and then check
the oil level in the final gear case.
NOTE:
_
The oil level should be at the brim of the filler
hole.
_
3. If the oil is below the brim of the filler hole,
add sufficient oil of the recommended
type to raise it to the correct level.
8-19