Starting A Warm Engine; Warming Up - Yamaha WOLVERINE YFM45FXV Owner's Manual

Hide thumbs Also See for WOLVERINE YFM45FXV:
Table of Contents

Advertisement

NOTE:
_
If the engine fails to start, release the start
switch, then push the start switch again.
Pause a few seconds before the next attempt.
Each cranking should be as short as possible
to preserve battery energy. Do not crank the
engine more than 10 seconds on each at-
tempt.
_
7. If the engine is started with the starter
(choke) in position 1, the starter (choke)
should be returned to position 2 to warm
up the engine. If the engine is started with
the starter (choke) in position 2, keep
the starter (choke) in this position to
warm up the engine.
8. Continue warming up the engine until it
idles smoothly and return the starter
(choke) to position 3 before riding.
CAUTION:
_
See the "Engine break-in" section prior to
operating the engine for the first time.
_
EBU00180

Starting a warm engine

To start a warm engine, refer to the "Starting a
cold engine" section. The starter (choke)
should not be used. The throttle should be
opened slightly.
EBU00182

Warming up

To get maximum engine life, always warm up
the engine before starting off. Never acceler-
ate hard with a cold engine! To see whether or
not the engine is warm, check if it responds to
the throttle normally with the starter (choke)
turned off.
6-3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents