Adjusting The Rear Brake Light Switch - Yamaha BLASTER YFS200P Owner's Manual

EBU00833

Adjusting the rear brake light switch

b
q
1. Rear brake light switch
The rear brake light switch, which is activated by
the brake pedal and brake lever, is properly
adjusted when the brake light comes on just
before braking takes effect. If necessary, adjust
the brake light switch as follows.
a
w
2. Adjusting nut
Turn the adjusting nut while holding the rear
brake light switch in place. To make the brake
light come on earlier, turn the adjusting nut in
direction a. To make the brake light come on
later, turn the adjusting nut in direction b.
8-24