Air Filter Cleaning - Yamaha BLASTER YFS200P Owner's Manual

a
a. Spark plug gap
When installing the spark plug, always clean the
gasket surface and use a new gasket. Wipe off
any grime from the threads and tighten to the
specified torque.
Tightening torque:
Spark plug:
25 Nm (2.5 m0kg, 18 ft0lb)
EBU00288

Air filter cleaning

NOTE
There is a check hose at the bottom of the air fil-
ter case. If dust or water collects in this hose,
empty the hose and clean the air filter element
and air filter case.
1. Check hose
1. Remove the seat.
2. Remove the air filter case cover.
8-8
q