Yamaha YZF-R6 Owner's Manual page 69

1. O-ring
7. Apply a thin coat of engine oil to
the O-ring of the new oil filter car-
tridge.
NOTE:
_
Make sure that the O-ring is properly
seated.
_
PERIODIC MAINTENANCE AND MINOR REPAIR
1. Torque wrench
8. Install the new oil filter cartridge
with an oil filter wrench, and then
tighten it to the specified torque
with a torque wrench.
Tightening torque:
Oil filter cartridge:
17 Nm (1.7 m·kgf)
9. Install the cowling.
10. Install the coolant reservoir cover
by installing the bolts.
11. Install the engine oil drain bolt, and
then tighten it to the specified
torque.
6-12
NOTE:
_
Check the washer for damage and re-
place it if necessary.
_
Tightening torque:
Engine oil drain bolt:
43 Nm (4.3 m·kgf)
12. Add the specified amount of the
recommended engine oil, and
then install and tighten the oil filler
cap.
Recommended engine oil:
See page 8-1.
Oil quantity:
Without oil filter cartridge
replacement:
2.4 L
With oil filter cartridge
replacement:
2.6 L
Total amount (dry engine):
3.4 L
6