Replacing An Auxiliary Light Bulb - Yamaha YZF-R6 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
6. Connect the headlight coupler.
7. Install the headlight bulb cover by
turning it clockwise.
8. Install the panel.
9. Have a Yamaha dealer adjust the
headlight beam if necessary.
6
1. Auxiliary light bulb cover
2. Quick fastener
Replacing an auxiliary light
bulb
This motorcycle is equipped with two
auxiliary lights. If an auxiliary light bulb
burns out, replace it as follows.
1. Remove the auxiliary light bulb
cover by removing the quick fas-
tener.
NOTE:
_
Remove the quick fastener by pushing
the center pin in with a screwdriver,
then pulling the fastener out.
_
6-43
1. Auxiliary light bulb
2. Auxiliary light bulb socket
2. Remove the socket (together with
EAU04982
the bulb) by pulling it out.
3. Remove the defective bulb by pull-
ing it out.
4. Insert a new bulb into the socket.
5. Install the socket (together with
the bulb) by pushing it in.
6. Install the auxiliary light bulb cover
by installing the quick fastener.