Zanussi ZWF 3122 User Manual page 9

6 Programme progress display
By selecting the wash programme, the pilot lights
corresponding to the various phases making up the
programme come on.
After the machine has started, only the running
phase pilot light stays on.
Prélavage/Voorwas
Voorwassen/Wassen
on this means that the machine is performing the
prewashing/washing phase.
Rinçage+/Spoelen+:
on this means that the machine is performing the
rinse phase.
Essorage/Zwieren:
this means that the machine is performing the
spin phase.
Vidange/Afpompen:
on this means that the machine is performing the
drain phase.
Fin/Einde:
end of programme
The END (Fin/Einde) pilot light flashes in the event of
operating problems:
- 4 flashes = the door has not been closed
- 2 flashes = the machine does not empty
- 1 flash = the machine does not fill
To eliminate the problem, see paragraph "Something
not working".
7 Spin speed selector dial
This dial allows you to reduce the final and the
intermediate spin speeds or to select the NO SPIN
or RINSE HOLD (anti-crease)
The speeds on the dial refer to cotton programmes.
Position 1000 or 1200 corresponds to 900 r.p.m. for
synthetics and wool/handwash and 700 r.p.m. for
delicates.
Position 500 corresponds to 450 r.p.m. for delicates
and 500 r.p.m. for synthetics and wool/handwash.
NO SPIN : by selecting this option all the
spinning phases are suppressed. To be used for
extremely delicate items.
: when this light comes
when this light comes
when this light comes on
when this light comes
option.
The machine will add 3 rinses on cotton
programmes and 1 rinse on synthetic
programme.
RINSE HOLD (anti-crease)
option the water of the last rinse is not emptied
out to prevent the fabrics from creasing. When
the programme has finished the phase light END
is on to indicate that the water must be emptied
out. The door cannot be opened.
To do this:
turn the programme selector dial to "O"
select the drain Q
programme.
Using the spin speed selector dial you can
choose the desired spin. If the dial remains on
position or
spin speed at 400 rpm.
depress START/PAUSE button.
8 Programme selector dial
The selector is divided into 5 sections:
• Cotton
• Synthetic
• Delicate
• Wool/Handwash
• Special programmes
O Reset programme/OFF
The selector dial can be turned either clockwise or
anticlockwise.
At the end of the programme the selector dial
must be turned to position O.
Attention!
If during a washing programme the selector dial is
turned to another programme, the pilot lights of the
programme progress display start to flash. The
machine will not perform the new selected
programme.
67
: by selecting this
or spin R
the machine will perform the